Extended tour toolkit

This kit is used for longer trips, when I want to be able to fix almost anything short of headset or bottom bracket replacement. It's based on one of the modifiable small tackle boxes that fishermen use. Case costs about $1.50. Here's a pic of the closed case:

And here's a pic of it in its open state:

And this is what's in it:
From top right corner, clockwise...
2 tire levers, shortened, with duct tape.
Shortened ballpoint pen (marks puncture location on tube also).
Half-round file.
Craftsman ignition wrenches, 8, 9, 10mm.
3.5" adjustable wrench.
Piece of a hacksaw blade.
Allens: 6, 5, 4, 3, 2.5, 2.
8mm to 6mm allen adapter.
Spare chain link.
Wrench Force 4-way spoke wrench.
Botle of chain lube (Eye drop containers are very useful for this purpose).
Lip Balm container filled with grease.
Matches sealed in plastic.
2 strips of double-sided tape.
Small Compass and Thermometer/Windchill gauge.
Emergency whistle.
2 tubes of patch glue.
Fiberfix emergency spoke.
Topeak chaintool.
SeberTech minipliers, wire cutters will cut 2mm brake cable, assorted blades, tweezers, file.
Assorted patches and sandpaper.

Not shown:
14mm socket, ground so the crescent wrench will fit it.
Assorted essential nuts, bolts and various spare parts....Chainring bolt, waterbottle bolt,cleat bolt, Rear derailleur pulley and bolt, chain masterlink.

I also have a small pack which contains:
1 full-length brake and derailleur cable.
A few zip ties.
Bailing wire.
Superglue.
Wetnap wipes.
A pair of latex gloves.
A small rag.
A few cable end caps.

Not enough tooltalk for you? Check out the Altoids tin toolkit.